Aremco Products, Inc.: CORR-PAINT CP2050 PROTECTIVE COATING TO 400 ºF NOW AVAILABLE

Monday, March 24, 2008

Corr-Paint tm CP2050, a new high temperature protective coating developed by Aremco Products, Inc., is
now used to coat metal components and structures used in automotive and industrial applications to
400 oF (204 ºC).
FEATURES
Corr-Paint tm CP2050 is a two part, 100% solids, epoxy-novolac, corrosion resistant system used to
protect steel components and structures used in aircraft, automotive, chemical processing, foundry, and
power generation plants for applications to 400 oF (204 ºC).
Corr-Paint tm CP2050 provides excellent adhesion to marginally prepared metal surfaces and exceptional
corrosion resistance. It is resistant to a wide range of chemicals including acetic acid, jet fuel, alcohols,
diesel fuel, gasoline, hydrochloric acid, nitric acid, phosphoric acid, potassium chloride, sodium chloride,
toluene and xylene. It also provides good thermal shock, salt spray, and UV resistance.
Corr-Paint tm CP2050 is a two-part system that is mixed in a 1-to-1 ratio by weight. It mixes to a thick
paste and is applied using a trowel or spatula. It sets and cures fully at room temperature in 24 hours or
can be heat cured at 175 oF for 4 hours to reduce set time. Typical film thickness is 50 mils for a single
coat.
Corr-Paint tm CP2050 is offered in three standard forms: CP2050-LF, CP2050-FF and CP2050-NF.
LF stands for long or coarse glass fibers; FF stands for fine glass fibers; and NF stands for no fibers.
Glass fibers are used to absorb thermal stresses and increase strength when coating large areas. All
products are available from stock in pint, quart, gallon and five-gallon pails.

View Company's products and contact information

http://www.aremco.com

View Similar Products